E-Mail-Formatfehler
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
HCT-800L Multifunctional SMT Pick and Place Machine
Along with dust, there might also be various chemical fumes present in the production environment of the SMT pick and place machine. The reliability of the product will be significantly impacted if these gases are corrosive or include any dangerous compounds that could harm humans or animals. As a result, the workplace needs to be kept dust-free, corrosive, and gas-free. This guarantees the product's weld quality, the equipment's smooth operation, and the operators' wellbeing.
As HCT-800L SMT Pick & Place Machine that equipped with 8 heads as well as a new flying vision system, the HCT-800L realizes a optimum chip mounting speed of 32,000 CPH. In addition, it is applicable to 0201 chips to the largest 30mm ICs by default and increases actual productivity and placement quality by applying a smart nozzle checking and replacing system.
Technical Parameters - Multifunctional Basic LED SMT Pick and Place Machine
|
Model |
HCT-800L |
|
|
Number of Heads |
Vision on the Fly |
8 |
|
Placement Rate |
Under the optimum condition |
32000CPH |
|
IPC9850 |
26800CPH |
|
|
Feeder Capacity |
Front and Back |
35 Tape Feeders (8mm/12mm Electric Standard) 35+35 Tape Feeders (Optional) |
|
IC Tray Capacity IC |
325 x 135mm |
2 |
|
Component Alignment |
Vision Detection |
|
|
Component Sizes |
Handled by Head Camera |
Smallest: 0201 (inch) |
|
Largest: 10 x 8 (mm) |
||
|
Handled by Fixed Bottom Camera |
Smallest: 1206 (inch) |
|
|
Largest: 30 x 30 (mm) |
||
|
Resolution
|
X/Y Axis |
Magnetic Levitation Linear Motor |
|
Z Axis |
Step-Servo Motor |
|
|
Rotation |
0 to 360° |
|
|
Placement Accuracy |
±0.05mm |
|
|
X-Y Repeatability |
Magnetic Grid |
±0.002mm |
|
PCB Size |
Maximum |
L 500 x W 350mm |
|
|
Minimum |
L 50 x W 50mm |
|
In-line Conveyor |
|
3-section Transmit |
|
Programming |
Vision Teach-in |
|
|
Coordinates Import |
||
|
Main Control |
|
Industrial PC |
|
Power |
AC 220V±10% (50/60Hz, 1 phase) |
|
|
Max. 3.0KW |
||
|
Air Pressure |
0.55-0.7MPa (5.6-7.1kgf/cm2) Built-in vacuum pump for nozzles |
|
|
External Dimension(mm) |
L x W x H |
1440*1600*1400MM |
|
Mass |
Approximate 1400kgs |
|
Product Features - Multifunctional Basic LED SMT Pick and Place Machine
1. Vision On the Fly Alignment
2. Bottom Vision Alignment System for big components/IC
3. Fiducial recognition and coordinate correction
4. Three-section conveyor system with SMEMA interface and automatic-width-control
5. Magnetic levitation linear motor in X and Y axis for high repeatability and stability
6. Smart Nozzle System provides automatic nozzle checking and replacing
7. Perfect for medium & high volume production
8. Optimized pick/place routing design, ensures precision and speed
9. Each mounting head has its Z - direction step-servo motor, which is designed for vertical motion
10. Works with different types of high-precision nozzle
11. For different PCB, FPC, MCPCB, PSB, etc.;
Suit for a variety of SMD components: resistors, capacitors, IC, QFP, CFP, etc.
12. Using imported high-precision ball screws, motors, solenoid valves, cables, etc., effectively improves placement accuracy, and stability.
13. Strong and rigid mechanical design
Cleaning of the pick and place machine
If the working environment of the machine is dusty, it will have a quality impact on the installation and welding of small parts and thin pitch (0.3mm) parts such as 0201 and 01005. It also increases wear and tear on equipment and may even lead to equipment failure. Increase the maintenance of the pick and place machine equipment.
In the production environment of the SMT pick and place machine, in addition to dust, there may be some chemical gases around. If there are some harmful substances in these gases, it will cause certain harm to the human body; if these gases are corrosive, it will seriously affect the reliability of the product. Therefore, the working environment must be kept clean, dust-free, corrosive, and odorless gas. This ensures the welding quality of the product, the normal operation of the equipment, and the health of the operators.
Product Display - Multifunctional Basic LED SMT Pick and Place Machine 
